عنوان انگلیسی: A Tutorial on the Impact of Distributed Generation (DG) on Distribution Systems
سال نشر: ۲۰۰۸
نویسنده: Charles J. Mozina
تعداد صفحه فارسی: ۳۰ – تعداد صفحه انگلیسی: ۱۹
دانشگاه: Beckwith Electric Company, Inc., USA
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس
چکیده
در بسیاری از بخشهای ایالاتمتحده، مقدار قابلتوجهی از ظرفیت تولید جدید از طریق نصب امکانات تولید توزیع شده(DG)در حال نصب است. خاموشی شمال شرقی در سال ۲۰۰۳ بدون شک نصب DG در ایالات متحده را تسریع خواهد کرد ، زیرا مشاغل بیشتری پدید خواهند آمد که نیاز به تولید مطمئن محلی دارند. حفاظت اتصال به DG اجازه میدهد تا به موازات سیستم برق مصرفی عمل کند و مهمترین مساله فنی در اکثر پروژههای DG است. به طور معمول، الزامات حفاظتی برای اتصال ژنراتورهای توزیع شده به شبکه برق توسط هر یک از این تاسیسات ایجاد شدهاست. این دستورالعملها به طور کلی مولدهای توزیعشده کوچکتر (۱۰ مگاوات یا کمتر)را پوشش میدهند که معمولا در سطح ارسال و توزیع به سیستم برق متصل میشوند. این مدارهای ابزاری برای تامین بارهای شعاعی طراحی شدهاند. بنابراین، معرفی تولید، منبعی برای توزیع مجدد جریان خطا در مدار تغذیه کننده فراهم میکند، که میتواند باعث از دست رفتن هماهنگی تقویت(relay coordination) و ولتاژهای اضافه بالقوه شود. در چند سال گذشته، تلاشهای IEEE و همچنین ایالت ها برای توسعه استانداردها و رهنمودهایی برای ارتباط متق
Abstract
Interconnect protection allows DG to operate in parallel with the utility power system and is the single most important technical issue in most DG projects. Typically, protection requirements to connect distributed generators to the utility grid had been established by each utility. These guidelines generally cover smaller distributed generators (10 MW or less), which are usually connected to the utility system at the subtransmission and distribution level. These utility circuits are designed to supply radial loads. Thus, the introduction of generation provides a source for redistribution of the fault current on the feeder circuit, which can cause the loss of relay coordination and potential overvoltages. Within the past few years, there have been efforts by the IEEE, as well as individual states, to develop standards and guidelines for the interconnection of DG. The stated goal of these standards/guidelines is to have a single document of standard technical requirements for DG interco
امتیاز شما: