skip to Main Content

اندازه‌گیری منحنی عملکرد آسفالتین در یک پلتفرم میکروسیالی

عنوان انگلیسی: Asphaltenes yield curve measurements on a microfluidic platform
سال نشر: ۲۰۱۵
نویسنده: Vincent J. Sieben,Asok Kumar Tharanivasan,John Ratulowski,Farshid Mostowfi
تعداد صفحه فارسی: ۱ – تعداد صفحه انگلیسی: ۱۳
دانشگاه: Schlumberger Canada Limited,Schlumberger Canada Limited,Schlumberger Canada Limited,Schlumberger Canada Limited
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس

چکیده

در این مقاله، یک دستگاه و روش میکروسیالی برای اندازه‌گیری عملکرد آسفالتین روی نمونه‌های نفت خام توصیف می‌شود. اندازه‌گیری‌های طیف‌سنجی نوری با یک پلتفرم میکروسیالی نگهداری سیال ترکیب شده است تا یک دستگاه میکروسیالی خودکار برای اندازه‌گیری عملکرد آسفالتین ایجاد شود. اندازه‌گیری‌های میکروسیالی همخوانی خوبی با اندازه‌گیری‌های شیمیایی مرطوب متعارف و نیز مدل‌های موجود نشان می‌دهند. جذب اولیه نفت اندازه‌گیری می‌شود و آسفالتین با افزودن تدریجی n-آلکان از نفت حذف می‌گردد که منجر به لخته‌سازی و فیلتراسیون متعاقب می‌شود. سپس، جذب نفت فاقد آسفالتین (مالتن ) اندازه‌گیری می‌شود و مقدار آسفالتین اولیه توسط تغییر در مقدار جذب تعیین می‌گردد. انحلال‌پذیری آسفالتین با تغییر نسبت تیترکننده -به-نفت (یعنی n-هپتان به نفت) موردبررسی قرار می‌گیرد، که بسته به نسبت انتخابی، منجر به عدم رسوب، جزئی، یا رسوب کامل آسفالتین می‌شود. جذب تراویده اندازه‌گیری می‌شود و به حداکثر مقدار برای تعیین کسر رسوب در هر نسبت نرمال می‌شود. معمولاً منحنی عملکرد شامل ۲۰ مورد از چنین نسبت‌هایی است که به هفته‌ها تا ماه‌ها وقت نیاز دا

Abstract

We describe a microfluidic apparatus and method for performing asphaltene yield measurements on crude oil samples. Optical spectroscopy measurements are combined with a microfluidic fluid handling platform to create an automated microfluidic apparatus to measure the asphaltene yield. The microfluidic measurements show good agreement with conventional wet chemistry measurements as well as available models. The initial absorbance of the oil is measured, and asphaltenes are removed from the oil by the gradual addition of n-alkane, which leads to flocculation and subsequent filtration. The absorbance of the de-asphalted oil (maltenes) is then measured and the initial asphaltene content is determined by the change in absorbance. The solubility of asphaltene is evaluated by varying the titrant-to-oil ratio (e.g., n-heptane–oil), which induces no, partial, or full precipitation of asphaltenes depending on the chosen ratio. The absorbance of the filtrate is measured and normalized to the maxim
امتیاز شما:
(No Ratings Yet)
Back To Top