skip to Main Content

تأثیر انواع ضایعات پلاستیکی بر روغن مایع پیرولیزی

عنوان انگلیسی: Effect of plastic waste types on pyrolysis liquid oil
سال نشر: ۲۰۱۷
نویسنده: R. Miandad,M.A. Barakat,Asad S. Aburiazaiza,M. Rehan,I.M.I. Ismail,A.S. Nizami
تعداد صفحه فارسی: ۲۵ – تعداد صفحه انگلیسی: ۱۴
دانشگاه: Department of Environmental Sciences, Faculty of Meteorology, Environment and Arid Land Agriculture, King Abdulaziz University, Jeddah, Saudi Arabia b Centre of Excellence in Environmental Studies (CEES), King Abdulaziz University, Jeddah, Saudi Arabia
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: اقتصادی

چکیده

در این مقاله به بررسی تأثیر انواع مختلفی از ضایعات پلاستیکی از جمله پلی استایرن (PS) ، پلی اتیلن (PE) ، پلی پروپیلن (PP) و پلی اتیلن ترفتالات (PET) بر بازده و کیفیت روغن مایع تولید شده از فرآیند تجزیه در اثر حرارت (پیرولیز) می پردازیم. برای این منظور یک رآکتور پیرولیز مقیاس آزمایشگاهی کوچک راه اندازی شد و در دمای بهینه و زمان بازداری به ترتیب ۴۵۰ درجه سانتیگراد و ۷۵ دقیقه کار کرد. ضایعات پلاستیکی PS حداکثر تولید روغن مایع (۸۰.۸٪) را در کنار کمترین تولید گازها (۱۳٪) و ذغال (۶.۲٪) نسبت به سایر انواع پلاستیک نشان دادند. روغن های مایع از انواع پلاستیک حاوی بسیاری از ترکیبات آروماتیک آلکان ها و آلکن ها هستند. روغن مایع حاصل از پیرولیز PS حاوی استایرن (۳/۴۸ درصد) ، اتیل بنزن (۲۱.۲ درصد) و تلوئن (۶/۲۵ درصد) بود. روغن های مایع پیرولیز پیدا شده است که دارای محدوده ویسکوزیته دینامیکی (۱.۷۷-۱.۹۰ مگا پاسکال در ثانیه) ، ویسکوزیته سینتیکی (۱.۹۲- ۲.۰۹ cSt) ، چگالی (۰.۹۱-۰.۹۲ گرم بر سانتی متر مکعب) ، نقطه ریزش (۱۱ (-۶۰ درجه سانتیگراد) )) ، نقطه انجماد (-۱۵ – (- ۶۵ درجه سانتیگراد)) ، نقطه اشتعال (۲۸.۱

Abstract

This paper aims to examine the effect of different plastic waste types such as polystyrene (PS), polyethylene (PE), polypropylene (PP) and polyethylene terephthalate (PET) on the yield and quality of produced liquid oil from the pyrolysis process. A small pilot scale pyrolysis reactor was commissioned for this purpose, and operated at optimum temperature and retention time of 450 °C and 75 min respectively. PS plastic waste showed maximum production of liquid oil (80.8%) along with least production of gases (13%) and char (6.2%) in comparison to other plastic types. Liquid oils from all plastic types contained mostly aromatic compounds with some alkanes and alkenes. Liquid oil from PS pyrolysis contained styrene (48.3%), ethylbenzene (21.2%) and toluene (25.6%). Pyrolysis liquid oils found to have ranges of dynamic viscosity (1.77–۱.۹۰ mPa s), kinematic viscosity (1.92–۲.۰۹ cSt), density (0.91–۰.۹۲ g/cm 3 ), pour point (−۱۱(-۶۰ °C)), freezing point (−۱۵-(-۶۵ °C)), flash point (28.1–۳۰
امتیاز شما:
(No Ratings Yet)
Back To Top