skip to Main Content

تاثیر عدم قطعیت حرکت مصالح و زمین بر منحنی‌های آسیب‌پذیری لرزه‌ای سازه‌های RC

عنوان انگلیسی: The effect of material and ground motion uncertainty on the seismic vulnerability curves of RC structure
سال نشر: ۲۰۰۶
نویسنده: Oh-Sung Kwon,Amr Elnashai
تعداد صفحه فارسی: ۱۴ – تعداد صفحه انگلیسی: ۱۴
دانشگاه: University of Illinois, 205 North Mathews, Urbana, IL 61801, United States b Mid-America Earthquake Center, University of Illinois, 205 North Mathews, Urbana, IL 61801, United States
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: اقتصادی

چکیده

با شروع این فرض که منحنی های آسیب پذیری یک ماده ضروری برای ارزیابی خسارت زلزله هستند ، این مقاله بر استقرار تأثیر نسبی تنوع حرکت شدید و پارامترهای ساختاری تصادفی در منحنی های آسیب پذیری متعاقب آن تمرکز دارد. علاوه بر این، تاثیر انتخاب مدل‌های آماری مورد استفاده برای ارایه نتایج شبیه‌سازی مورد مطالعه قرار گرفته‌است. یک قاب بتنی مسلح با مقاومت خمشی معمولی سه طبقه، که قبلا آزمایش شد، به عنوان مبنایی برای تحلیل آسیب‌پذیری استفاده می‌شود. محیط تحلیلی و مدل ساختاری از طریق مقایسه با نتایج تست جدول لرزان تایید می‌شوند. انتخاب مجموعه حرکت زمین، تعریف حالات حدی، دستکاری آماری نتایج شبیه‌سازی، و اثر تغییر پذیری مواد مورد بررسی قرار گرفته‌است. هیچ تقریبی برای کاهش اندازه نمونه یا به حداقل رساندن تلاش تحلیلی به کار نمی‌رود تا توجه به پارامترهای مورد بررسی معطوف شود. با وجود دامنه محدود این مطالعه، نتایج ارایه‌شده نشان می‌دهد که اثر تصادفی بودن در پارامترهای پاسخ ماده بسیار کم‌تر از اثر ویژگی‌های حرکت قوی است. بنابراین، بر اهمیت انتخاب دقیق و مقیاس بندی حرکت نیرومند و استفاده از حالت‌های حدی مناسب

Abstract

Starting from the premise that vulnerability curves are an indispensable ingredient of earthquake loss assessment, this paper focuses on establishing the relative effect of strong-motion variability and random structural parameters on the ensuing vulnerability curves. Moreover, the effect of the selection of statistical models used to present simulation results is studied. A three story ordinary moment resisting reinforced concrete frame, previously shake-table tested, is used as a basis for the fragility analysis. The analytical environment and the structural model are verified through comparison with shaking-table test results. The selection of ground motion sets, definition of limit states, statistical manipulation of simulation results, and the effect of material variability are investigated. No approximations are used to reduce the sample size or minimize the analytical effort, in order that attention is focused on the parameters under investigation. Notwithstanding the limited s
امتیاز شما:
(No Ratings Yet)
Back To Top