skip to Main Content

تاثیر کرنش‌های الاستیک در طول تغییر شکل قالب ستون‌های سنگی

عنوان انگلیسی: Influence of elastic strains during plastic deformation of encased stone columns
سال نشر: ۲۰۱۳
نویسنده: Jorge Castro,César Sagaseta
تعداد صفحه فارسی: ۱۵ – تعداد صفحه انگلیسی: ۹
دانشگاه: Group of Geotechnical Engineering, Department of Ground Engineering and Materials Science, University of Cantabria, Avda. de Los Castros, S/N, 39005 Santander, Spain
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: اقتصادی

چکیده

این مقاله اهمیت کرنش‌های الاستیک ستون‌های سنگی روکش دار را در طول فرآیند تغییر شکل قالب مورد بررسی قرار می‌دهد. یک راه‌حل تحلیلی جدید که شامل این کرنشهای الاستیک می‌شود برای مطالعه تغییر شکل و حفاظ در اطراف ستون‌های سنگی محصور شده ارایه شده‌است که یک تکنیک رایج بهبود سطح زمین برای خاک‌های نرم هستند.مدل راه‌حل تحلیلی تنها یک سلول واحد است، یعنی یک ستون پایانیو خاک اطراف آن، با تقارن محوری زیر بار یکنواخت هستند.خاک نرم به عنوان ماده الاستیک و ستون به عنوان یک ماده پلاستیکی کامل الاستیک با استفاده از معیار موهر – کولمب و قاعده جریان غیر مرتبط با یک زاویه انعطاف پذیر ثابت انتخاب می‌شود.راه‌حل در فرم بسته ارائه شده‌است و در یک صفحه گسترده به طور مستقیم قابل‌استفاده می باشد.کرنش‌های الاستیک در طول تغییر شکل پلاستیک ستون به عنوان تعمیمی از راه‌حل قبلی توسط نویسندگان اضافه می‌شوند.این گنجاندن، فرمول‌بندی راه‌حل تحلیلی را پیچیده می‌کند.تفاوت با راه‌حل قبلی، و بنابراین، آن کرنش‌های الاستیک، تنها برای سختی های بالا اهمیت دارند.از راه‌حل تحلیلی برای مطالعه طول روکش کردن ستون استفاده می‌شود.روش ارا

Abstract

This paper studies the significance of elastic strains of encased stone columns during their plastic deformation. A new analytical solution that includes these elastic strains is presented to study the deformation and consolidation around encased stone columns, which are a common ground improvement technique for soft soils. The analytical solution models only a unit cell, i.e. an end-bearing column and its surrounding soil, in axial symmetry under a rigid and uniform load. The soft soil is treated as an elastic material and the column as an elastic-perfect plastic material using the Mohr-Coulomb yield criterion and a non-associated flow rule, with a constant dilatancy angle. The solution is presented in a closed form and is directly usable in a spreadsheet. The elastic strains during plastic deformation of the column are added as an extension of a previous solution by the authors. This inclusion complicates the formulation of the analytical solution. The differences with the previous
امتیاز شما:
(No Ratings Yet)
Back To Top