skip to Main Content

تجزیه و تحلیل گرماسختی فرآیند نمک‌زدایی MED – MVC

عنوان انگلیسی: Transient and thermo-economic analysis of MED-MVC desalination system
سال نشر: ۲۰۱۹
نویسنده: Mohamed L. Elsayed,Osama Mesalhy,Ramy H. Mohammed,Louis C. Chow
تعداد صفحه فارسی: ۱۳ – تعداد صفحه انگلیسی: ۴۶
دانشگاه: Department of Mechanical Power Engineering, Zagazig University, Zagazig 44519, Egypt,Department of Mechanical and Aerospace Engineering, University of Central Florida, Orlando, FL 32816-2450, USA
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: اقتصادی

چکیده

یک مدل اگزرژی- اقتصادی برای ارزیابی عملکرد یک کارخانه نمک‌زدایی مورد استفاده در یک واحد کمپرسور بخار مکانیکی (MED – mvc) با ظرفیت تولید آب ۱۵۰۰ m۳ / day مورد استفاده قرار می‌گیرد. نتایج نشان می‌دهد که بازده قانون دوم، ۲.۸ % است. واحدهای تبخیر کننده و MVC، حدود ۳۹ و ۵۲ درصد از کل تلفات اگزرژی را تشکیل می‌دهند. قیمت کل آب (TWP) با استفاده از یک مدل ساده اقتصادی و ۱.۶۳ دلار / m۳ هنگامی که با استفاده از یک مدل هزینه مبتنی بر اکسرژی محاسبه می‌شود، ۱.۷۰ دلار بر متر مکعب است. افزایش تعداد تاثیرات از ۱ تا ۶ منجر به کاهش ۳۹ درصدی در مصرف توان ویژه (SPC)، افزایش ۷۰ درصدی و کاهش ۲۴ درصدی در مصرف برق می‌شود. یک مدل دینامیکی برای بررسی اثر نوسانات کار کمپرسور ایجاد شده‌است (Wc). و دمای آب دریا (T) بر مشخصه ها و عملکرد فرایند کارخانه تاثیر می‌گذارد. نتایج مدل دینامیکی نشان می‌دهد که اختلال در مولفه ی Wc اثر قابل‌توجهی بر عملکرد گذرای کارخانه دارد و ممکن است باعث ایجاد اختلال در فرایند شود. یک مقدار معین از شرایط حالت پایدار بدون کنترل مناسب بر روی واکنش فرایند کارخانه می‌تواند منجر به خشک شدن من

Abstract

Highlights•Exergo-economic and simple cost models are used to estimate the total water price.•Dynamic behavior of MED-MVC plant under input disturbances is presented.•Compressor power changes have a significant effect on the plant transient behavior.•Seawater temperature reduction decreases the plant capacity and increases the SPC.AbstractAn exergo-economic model is used to assess the performance of a multi-effect desalination plant integrated to a mechanical vapor compressor unit (MED-MVC) with a water production capacity of 1500 m3/day. The results show that the second law efficiency () is 2.8%. The MVC and evaporator units are responsible for about 39 and 52% of the total exergy destruction, respectively. The total water price (TWP) is 1.70 $/m3 when calculated using a simple conventional economic model and 1.63 $/m3 when calculated using an exergy-based cost model. Increasing the number of effects from 1 to 6 results in a 39% reduction in the specific power consumption (SPC), a 70%
امتیاز شما:
(No Ratings Yet)
Back To Top