عنوان انگلیسی: Performance analysis of proposed hybrid air conditioning and humidification–dehumidification systems for energy saving and water production in hot and dry climatic regions
سال نشر: ۲۰۱۵
نویسنده: S.A. Nada,H.F. Elattar,A. Fouda
تعداد صفحه فارسی: ۳۳ – تعداد صفحه انگلیسی: ۲۰
دانشگاه: Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, USA b Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس
چکیده
عملکرد سیستمهای یکپارچه تهویه مطبوع (A / C)و نمکزدایی مرطوب ساز – مرطوب ساز پیشنهاد شده برای مناطق آب و هوایی گرم و خشک از نظر تئوری مورد بررسی قرار گرفتهاست. هدف سیستمهای پیشنهادی صرفهجویی در انرژی و استفاده از سیستمها در تولید آب شیرین است. چهار سیستم با واحدهای بازیافت حرارتی و کولرهای تبخیری در مکانهای مختلف ارائه، تحلیل و ارزیابی شدهاند. دو سیستم دیگر به عنوان سیستمهای مرجع در ارزیابی سیستمهای پیشنهادی مورد استفاده قرار میگیرند. نرخ تولید آب تازه، ظرفیت خنککننده A / C، مصرف برق A / C، صرفهجویی در مصرف برق و پارامترهای صرفهجویی در هزینه کل (TCS)برای ارزیابی و مقایسه سیستمها استفاده میشوند. نتایج نشان میدهد که (۱)نرخ تولید آب تازه سیستمهای پیشنهادی با افزایش نسبت هوای تازه، دمای هوای ورودی و دمای تر فضای باز افزایش مییابد، (۲)صرفهجویی در سیستمهای پیشنهادی با افزایش نسبت هوای تازه و دمای هوای ورودی و کاهش دمای تر هوای بیرون افزایش مییابد، (۳)قرار دادن خنک سازی تبخیری پس از اختلاط هوای تازه به طور قابلتوجهی نرخ تولید آب را افزایش میدهد، و (۶)استفاده
Abstract
Performance of integrative air-conditioning (A/C) and humidification–dehumidification desalination systems proposed for hot and dry climatic regions is theoretically investigated. The proposed systems aim to energy saving and systems utilization in fresh water production. Four systems with evaporative cooler and heat recovery units located at different locations are proposed, analyzed and evaluated at different operating parameters (fresh air ratio, supply air temperature and outside air wet bulb temperature). Other two basic systems are used as reference systems in proposed systems assessment. Fresh water production rate, A/C cooling capacity, A/C electrical power consumption, saving in power consumptions and total cost saving (TCS) parameters are used for systems evaluations and comparisons. The results show that (i) the fresh water production rates of the proposed systems increase with increasing fresh air ratio, supply air temperature and outdoor wet bulb temperature, (ii) powers
امتیاز شما: