skip to Main Content

تغییر ناهمسانگردی G0 در ماسه هاستون در طول بارگیری یکنواخت و سیکلی ​

عنوان انگلیسی: Changing anisotropy of G0 in Hostun sand during dr
سال نشر: ۲۰۱۵
نویسنده: D.E. Escribano,D.F.T. Nash
تعداد صفحه فارسی: ۲۲ – تعداد صفحه انگلیسی: ۱۱
دانشگاه: University of Dundee, UK , University of Bristol, UK
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس

چکیده

ناهمسانگردی ذاتی و القایی ماسه هاستون اشباع‌شده با استفاده از اندازه‌گیری‌های سرعت موج برشی تحت شرایط سه محوری زه‌کشی شده و سیکلی مورد بررسی قرار گرفته‌است.آزمایش‌ها بر روی نمونه‌های تهیه‌شده توسط تکه های مرطوب برای دامنه وسیعی از چگالی‌های اولیه در یک دستگاه سه محوری کامل و مجهز به ابزار اندازه گیری انعطاف پذیر در سه جهت انجام شد.داده‌ها با توجه به تغییرات نسبت خلا و میانگین تنش موثر، مورد بررسی قرار گرفته‌اند.تکامل سختی برشی در شرایط تنش ناهمسانگرد با انجام هر دو تست فشار موثر ثابت و آزمون‌های تنش شعاعی ثابت در فشار و گسترش بررسی شده‌است.برخی نمونه‌ها متعاقبا در معرض چرخه‌های بارگیری تخلیه تحت متعدد قرار گرفتند و تکامل سختی برشی مورد بررسی قرار گرفت.آزمایش‌ها نشان داد که ناهمسانگردی ذاتی اولیه کوچک، یعنی پایین‌تر از آنچه قبلا در نمونه‌های خشک پلوتونیوم همان شن در دستگاه سلول مکعبی مشاهده شده‌بود.تغییر سطوح تنش در فشار یا گسترش منجر به ایجاد بی نظمی ناشی از تنش شد، حتی زمانی که هیچ تغییری در مقادیر برای p وجود نداشت، که نشان‌دهنده این است که عبارت‌های تجربی مورد استفاده برای G0 تحت شر

Abstract

The inherent and stress-induced anisotropy of saturated Hostun sand has been examined by means of shear wave velocity measurements under drained monotonic and cyclic triaxial conditions. Tests were carried out on samples prepared by moist tamping for a wide range of initial densities in a fully instrumented stress-path triaxial apparatus equipped with bender element instrumentation in three directions. Data have been normalised to account for the variations in void ratio and mean effective stress. The evolution of shear stiffness under anisotropic stress conditions has been explored by performing both constant mean effective stress tests and constant radial stress tests in compression and extension. Some samples were subsequently subjected to multiple drained deviatoric loading cycles, and the evolution of shear stiffness was examined. The tests showed that the initial inherent anisotropy was small, namely, lower than that previously observed in dry pluviated samples of the same sand i
امتیاز شما:
(No Ratings Yet)
Back To Top