skip to Main Content

حفاظت با شینه بسیار سریع با استفاده از تبدیل سریع S سیگنال‌های جریان

عنوان انگلیسی: Ultra-fast busbar protection employing fast S transform of current signals
سال نشر: ۲۰۲۰
نویسنده: Mahmoud Lashgari,S. Mohammad Shahrtash
تعداد صفحه فارسی: ۱۸ – تعداد صفحه انگلیسی: ۹
دانشگاه: Center of Excellence for Power System Automation and Operation, Iran University of Science and Technology, Tehran, Iran
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس

چکیده

این مقاله یک روش جدید برای حفاظت سریع شینه (تمام ژنراتور‌ها، ترانسفورماتور‌ها، سیم‌ها و کابل‌های یک نیروگاه یا تبدیل گاه که ولتاژ برابری دارند با یک شمش یا یک رسانا به نام شینه یا باس‌بار (Busbar) در هر فاز بهم متصل می‌شوند.در شینه تمام انرژی ژنراتورها، ترانسفورماتورها یا هر دو بهم می‌پیوندند و از آنجا به‌طور مستقیم با همان ولتاژ یا به کمک ترانسفورماتور افزاینده یا کاهنده با ولتاژ دیگر به مصرف کننده‌ها یا شینه‌های دیگر هدایت می‌گردند. ازاین‌رو می‌توان گفت که شینه وسیله جمع و پخش انرژی در آن واحد است.تمام وسایل ساختمان بایستی به شینه متصل شوند. ) براساس تبدیل S سیگنال‌های جریان در یک پست ارائه می‌دهد. در این روش، مولفه‌های فرکانس بالای سیگنال‌های جریان، تولید شده توسط خطا، با استفاده از تبدیل سریع S در نقاط که ترانسفورماتورهای جریان (‏CET) ‏ایستگاه‌های فرعی نصب می‌شوند، استخراج می‌شوند. سپس، نتایج پردازش می‌شوند و با استفاده از قوانین تصمیم ‌گیری پیشنهادی، خطاهای خارجی (‏خطاهای حاشیه‌ای و خطاهای خطی)‏ از خطاهای داخلی متمایز می‌شوند. با توجه به نتایج شبیه ‌سازی، الگوریتم پیشنهادی دارای ا

Abstract

Highlights•Proposing an ultra-fast algorithm for busbar protection.•Responding well to simultaneous faults and internal and external faults with different fault resistances and different FIAs (even 0°).•Applicable to various bus systems including one-and-half bus systems with arbitrary number of bays.•Having immune performance against the presence of noise down to 10 dB.•Having sustained performance as data window moves.AbstractThis paper presents a new method for fast busbar protection based on S transform of current signals in a substation. In this method high-frequency components of current signals, generated by faults, are extracted by applying fast S transform at the points where current transformers (CTs) of substations are installed. Then, the results are processed and by employing the proposed decision rules, external faults (bay faults and line faults) are discriminated from internal ones. According to the simulation results, the proposed algorithm has high security and depend
امتیاز شما:
(No Ratings Yet)
Back To Top