skip to Main Content

رفتار لرزه‌ای قاب‌های فولادی مهاربندی شده فولادی متحدالمرکز و استفاده از آنها در تقویت قاب‌های بتن مسلح شده در کاربردهای خارجی

عنوان انگلیسی: Seismic behavior of concentrically steel braced frames and their use in strengthening of reinforced concrete frames by external application
سال نشر: ۲۰۱۶
نویسنده: Alptug Unal,Mevlut Yasar Kaltakci
تعداد صفحه فارسی: ۲۰ – تعداد صفحه انگلیسی: ۱۶
دانشگاه: ۱ Department of Civil Engineering, Selcuk University, Engineering Faculty, Konya, Turkey 2 Department of Civil Engineering, Hasan Kalyoncu University, Engineering Faculty, Gaziantep, Turkey
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس

چکیده

بررسی‌های متعددی در خصوص موضوع اطمینان از ایمنی زلزله‌ای سازه‌های بتنی و فولادی تقویت شده با استفاده از قاب‌های مهاربندی شده فولادی صورت گرفته است اما در هیچ یک از مطالعات انجام شده، رفتار فردی قاب‌های مهاربندی شده فولادی تحت بار زمین‌لرزه و تقویت سازه‌های بتن مسلح با قاب‌های مهاربندی شده فولادی خارج صفحه‌ای مورد بررسی قرار نگرفته است. در این پژوهش به منظور ارزیابی رفتار نوع «قاب‌های مهاربندی شده فولادی متحدالمرکز» تعریف شده در TEC-2007 تحت بارهای جانبی، تحلیل ابعادی قاب‌های مهاربندی شده فولادی متحدالمرکز طراحی شده با مقیاس‌ها و ابعاد مختلف به انجام رسیده است و نتایج حاصل براساس TEC-2007 کنترل شده و پس از انجام تحلیل رانشی استاتیک، رفتار و ظرفیت بار قاب‌های مهاربندی شده فولادی متحدالمرکز و زنجیره لولاهای اجزای سازنده قاب‌های مهاربندی شده فولادی متحدالمرکز مورد بررسی قرار گرفته‌اند. قاب‌های مهاربندی شده فولادی متحدالمرکزی که به صورت تحلیل مورد بررسی قرار گرفته‌اند از ۲ طبقه و یک دهانه تشکیل شده و به صورت دو دسته با مقیاس‌های ۲/۱ و ۳/۱ تشکیل شده‌اند. در این پژوهش، قاب‌های مهاربندی شده فو

Abstract

There are many studies in the literature conducted on the subject of ensuring earthquake safety of
reinforced concrete and steel structures using steel braced frames, but no detailed study concerning individual
behavior of steel braced frames under earthquake loads and strengthening of reinforced concrete structures with outof-plane steel braced frames has been encountered. In this study, in order to evaluate behaviors of “Concentrically
Steel Braced Frames” types defined in TEC-2007 under lateral loads, dimensional analysis of Concentrically Steel
Braced Frames designed with different scales and dimensions was conducted, the results were controlled according
to TEC-2007, and after conducting static pushover analysis, behavior and load capacity of the Concentrically Steel
Braced Frames and hinges sequence of the elements constituting the Concentrically Steel Braced Frames were tested.
Concentrically Steel Braced Frames that were tested analytically consist of 2 storey and one ba
امتیاز شما:
(No Ratings Yet)
Back To Top