skip to Main Content

مجتمع سازی ترکیبات خاکستر برنج و خاکستر هوابرد، روی بتن توسط جایگزینی سیمان ۳۰٪

عنوان انگلیسی: Combine Effect of Rice Husk Ash and Fly Ash on Concrete by 30% Cement Replacement
سال نشر: ۲۰۱۳
نویسنده: Satish H. Sathawane,Vikrant S. Vairagade,Kavita S. Kene
تعداد صفحه فارسی: ۱۶ – تعداد صفحه انگلیسی: ۱۰
دانشگاه: Chemical, Civil and Mechanical Engineering Track of 3rd Nirma University International Conference
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس

چکیده

در این مقاله، بررسی تجربی آزمایشی به منظور بررسی اثر جایگزینی سیمان توسط خاکستر هوابر (FA) و پوست خرد شده برنج (RHA) در نسبت ترکیبی ازFA 30٪ و ۰٪ RHA ، در سیمان با جایگزینی سیمان با افزایش تدریجی RHA به میزان ۲.۵% و به صورت همزمان کاهش تدریجی FA به میزان ۲.۵% اعمال میشود. آخرین نسبت به میزان ۱۵٪ FA و ۱۵٪ RHA گرفته شد. آزمایش‌ها روی بتون سخت شده در طبیعت مخرب بودند که شامل آزمایش فشاری بر روی مکعبی برای اندازه (۱۵۰ * ۱۵۰ میلی متر)در ۲۸ روز عمل‌آوری (۱۵۰ * ۱۵۰ میلی متر)در ۲۸ روز عمل‌آوری به عنوان هر IS است: در سال ۱۹۵۹، استحکام کششی بر روی سیلندر (۱۵۰ میلی متر و قطر ۳۰۰ میلی متر)در ۲۸ روز درمان به عنوان هر IS: ۵۸۱۶ ۱۹۹۹. کار ارایه‌شده در این مقاله، تاثیرات بر روی رفتار بتن تولید شده از سیمان با ترکیب FA و rha در نسبت‌های مختلف بر روی خواص مکانیکی بتن، مانند مقاومت فشاری، مقاومت خمشی و کشش تفکیکی را گزارش می‌دهد. نتایج تحقیق نشان داد که مقاومت فشاری تا ۳۰.۱۵ % در مقایسه با بتن کنترل در ۲۸ روز افزایش پیدا می‌کند، مقاومت خمشی در مقایسه با بتن شاهد در ۲۸ روز کاهش می‌یابد، در حالی که مقاومت ک

Abstract

In this paper, the detailed experimental investigation was done to study the effect of partial replacement of cement by Fly Ash (FA) and
Rice Husk Ash (RHA) in combine proportion started from 30% FA and 0% RHA mix together in concrete by replacement of cement with
the gradual increase of RHA by 2.5% and simultaneously gradual decrease of FA by 2.5%. Last proportion was taken 15%FA and 15%
RHA. The tests on hardened concrete were destructive in nature which includes compressive test on cube for size (150 x 150 x 150 mm)
at 7,14,28,56 and 90 days of curing as per IS: 516 1959, Flexural strength on beam (150 x 150 x700 mm) at 28 days of curing as per IS:
۵۱۶ ۱۹۵۹ and split tensile strength on cylinder (150 mm ø x 300mm) at 28 days of curing as per IS: 5816 1999. The work presented in
this paper reports the effects on the behavior of concrete produced from cement with combination of FA and RHA at different proportions
on the mechanical properties of concrete such as compressive stre
امتیاز شما:
(No Ratings Yet)
Back To Top