skip to Main Content

یک مدل تحلیلی برای رفتار تنش-کرنش بتن محدود شده

عنوان انگلیسی: An analytical model for stress–strain behavior of confined concrete
سال نشر: ۲۰۰۵
نویسنده: Baris Binici
تعداد صفحه فارسی: ۳۱ – تعداد صفحه انگلیسی: ۱۲
دانشگاه: Middle East Technical University, Department of Civil Engineering,
نشریه: Process Safety and Environmental Protection
کیفیت ترجمه: ترجمه پلاس

چکیده

به خوبی شناخته شده است که قدرت و انعطاف پذیری بتن به شدت وابسته به سطح سلول های ارائه شده با تقویت جانبی هستند. سختی و رفتار سازنده تقویت محصور (الاستیک، الاستوپلاستیک، و غیره) عوامل مهم موثر بر رفتار بتن هستند. در این مطالعه، مدل بتن محصور ساده جدیدی برای توصیف ویژگی های تغییر شکل محوری و جانبی بتن تحت فشار سه محوری توسعه یافته است. رابطه تنش-کرنش بتن محصور در جهت محوری با منطقه الاستیک پیرو یک منحنی غیر خطی تعریف شده است. منطقه نزولی منحنی تنش-کرنش با استفاده از معیار انرژی شکست ثابت تعریف شده است. حد الاستیک، استحکام نهایی و ظرفیت باقی مانده بتن محصور شده با استفاده از معیار لئون-پرامونو تعیین شد. تغییر شکل جانبی بتن محصور است با استفاده از یک تابع توصیف شد که یک انتقال راحت از رفتار الاستیک به غیر ارتجاعی را فراهم می کند و شرایط کرنش حجمی صفر در مقاومت نهایی را برآورده می سازد. مدل در مقایسه با نتایج حاصل از آزمون سه محوری فشرده سازی بتن، الیاف و پلیمرهای تقویت شده (FRP) و آزمون های بتن فولاد محدود در مقالات پیشین گزارش شده است. سازش خوبی از نظر قدرت نهایی، قدرت باقی مانده و محوری

Abstract

It is well known that the strength and ductility of concrete are highly dependent on the level of confinement provided by the lateral reinforcement. The stiffness and the constitutive behavior of the confining reinforcement (elastic, elastoplastic, etc.) are the important factors affecting the behavior of concrete. In this study, a new simple confined concrete model is developed for describing the axial and lateral deformation characteristics of concrete under triaxial compression. The stress–strain relationship of confined concrete in the axial direction is defined with an elastic region followed by a nonlinear curve. The descending region of the stress–strain curve is defined using a constant failure energy criterion. The elastic limit, ultimate strength, and residual capacity of confined concrete are determined using the Leon–Pramono criterion. The lateral deformation of confined concrete is described using a function that provides a smooth transition from elastic to inelastic beha
امتیاز شما:
(No Ratings Yet)
Back To Top